australian aviation logo

Pilot walks away uninjured after R44 crashes on its side

written by Adam Thorn | December 9, 2022

VH-HOB following the collision with inset showing clutch shaft with upper drive sheaves and displaced hydraulic reservoir (ATSB)

A quick-thinking pilot who conducted an emergency descent of an R44 walked away alive despite the helicopter subsequently hitting a vehicle and landing on its side.

The incident occurred during an aerial spraying operation in Clare, South Australia in 2020 and was blamed on an undetected fatigue crack. A ground crewman at the scene also escaped uninjured and helped the pilot escape from the aircraft’s wreckage.

Australian Transport Safety Bureau (ATSB) director of transport safety, Dr Stuart Godley, said, “Our investigation determined that the forward yoke of the clutch shaft had failed due to an undetected fatigue crack that originated from an indent in one of the arms of the yoke.

“This resulted in loss of drive to the main and tail rotor systems, and the loss of hydraulic fluid, which removed hydraulic power assistance to the flight control servos.

“The pilot experienced difficulties in controlling the helicopter and executed an emergency descent from a low height without hydraulic power assistance and no tail rotor control.”


The ATSB report revealed that the pilot was descending the helicopter to the landing site to reload the chemical hopper days before Christmas 2020 when a loud bang emanated from the rear of R44, and the flight controls appeared to be jammed.

The helicopter collided heavily with the loading vehicle, coming to rest on its side.

The investigation found that the helicopter manufacturer’s maintenance instructions requiring verification that no cracks, corrosion or fretting were present on the yoke, lacked specific instructions on the method to be employed.

The visual inspection that was employed increased the risk that a crack in the yoke arm may not be detected

The manufacturer has since developed new maintenance inspection requirements for the clutch shaft forward yoke, which were included in the R44 maintenance manual in August 2022.

Earlier, in June 2021, the ATSB released a Safety Advisory Notice to R44 operators that based on the investigation’s preliminary finding of fatigue cracking, to look for the presence of corrosion, fretting or cracking, which may not be visually obvious during all inspections of the clutch shaft yoke.

CASA also issued an Airworthiness Bulletin, (AWB 63-010) advising industry of the failure of the yoke based on the ATSB investigation preliminary finding.

“This occurrence highlights how non-life limited components such as a drive train yoke may still develop defects and fail in-flight,” said Dr Godley.

“When conducting inspections, pilots and maintenance engineers should be prepared for the unexpected, and remain vigilant for defects in parts with an established history of reliability.”

You need to be a member to post comments. Become a member today!

You don't have credit card details available. You will be redirected to update payment method page. Click OK to continue.