The AW609 would be an ideal aeromedical aircraft to take patients from Lord Howe Island to medical care. Strong crosswinds often close the runway to aeroplane traffic. The AW609 can land safely into the prevailing wind.
The AW609 would be an ideal aeromedical aircraft to take patients from Lord Howe Island to medical care. Strong crosswinds often close the runway to aeroplane traffic. The AW609 can land safely into the prevailing wind.
Innovative Thinking
Health and safety concerns are driving new solutions
Will COVID-19 create a tiltrotor market in Australia?
At present, medical services in remote tourist areas are adequate for most of the ‘Grey Nomads’ traditionally heading ‘out bush’, to the centre of Australia. The Royal Flying Doctor Service and other small jet aeromedical services are often tasked by small regional hospitals to take patients to a larger hospital with better trauma capabilities. Understandably, aeromedical helicopters suffering from the ‘tyranny of distance’ do not have enough fuel to handle long-range evacuation flights without refuelling en route.
This content is available exclusively to Australian Aviation members.
A monthly membership is only $5.99 or save with our annual plans.
- Australian Aviation quarterly print & digital magazines
- Access to In Focus reports every month on our website
- Unlimited access to all Australian Aviation digital content
- Access to the Australian Aviation app
- Australian Aviation quarterly print & digital magazines
- Access to In Focus reports every month on our website
- Access to our Behind the Lens photo galleries and other exclusive content
- Daily news updates via our email bulletin
- Unlimited access to all Australian Aviation digital content
- Access to the Australian Aviation app
- Australian Aviation quarterly print & digital magazines
- Access to In Focus reports every month on our website
- Access to our Behind the Lens photo galleries and other exclusive content
- Daily news updates via our email bulletin
As a result it is very hard to comply with the ‘Golden Hour’ rule when a badly injured patient is collected in remote area by an aeromedical helicopter, which then has to fly to an airport to transfer the patient to an aeroplane medical service such as the Royal Flying Doctor Service.
Aviation consultants have noted the closure of Australia’s national borders due to the coronavirus has stopped our tourists travelling overseas. As a result, they will probably head to our inland tourist resorts, and perhaps double the number of domestic holidaymakers visiting our remote tourist areas. Their concern is our existing medical facilities would not be able to cope. Obviously, most of the tourists in these areas are retirees who often need more advanced medical services.
It would be financially and logistically very difficult to quickly double the aeroplane and helicopter aeromedical services in the remote areas. One option would be to reconsider the capabilities of long-range tilt rotor aircraft such as the Leonardo AW609, which can undertake medical transport being done by Beech King Air and similar aeroplanes.
Apparently, the pending increase in tourism in remote areas should not be underestimated. According to federal government sources, Australians took 5.6 million overseas holiday trips last year, spending an estimated $43.2 billion. Today, consumer research shows more than 60 per cent of Australians are keen to travel domestically once restrictions ease. Tourism Australia will be increasing their marketing activity to strongly encourage Australians to get out and explore their own back yard.
‘Despite combining the best of aeroplane and helicopter worlds, the AW609 has its own limitations’
The AgustaWestland AW609, formerly the Bell/Agusta BA609, is a twin-engined tiltrotor VTOL aircraft with a configuration similar to the Bell Boeing V-22 Osprey. It is capable of landing vertically like a helicopter while having a range and speed in excess of conventional rotorcraft. The AW609 is aimed at the civilian aviation market, in particular VIP, offshore oil and gas, and HEMS operators. On 6 December 2002, the first ground tests of the BA609 prototype began, and the first flight took place on 6 March 2003 in Arlington, Texas.
Despite combining the best of aeroplane and helicopter worlds, the AW609 has its own limitations and is not designed as a replacement for either the helicopter or aeroplane. Tiltrotors have a smaller payload than the equipment class helicopters and slightly less range than the equivalent size turboprop.
But having a longer range and a higher speed than a helicopter, the pressurised AW609 is capable of flying into known icing conditions and cruising at 25,000 feet above a lot of the weather which can be troublesome for helicopters, especially at night in remote areas. It is suitable for SAR, HEMS, and law enforcement missions. HEMS time-critical scenarios makes it invaluable, doubling the range in the critical ‘Golden Hour’). Up to four medics can care for a patient in a fully medically equipped cabin. It is an ideal machine for Australia due to its range of around 750 nautical miles or 1,000 nautical miles with aux tank. It can cruise at 275 knots.
Weight differences are substantial. The King Air KA250 is 5,670 kilograms; the AW139 6,400 kilograms and AW609 8,160 kilograms (AW609 is in the eight-tonne helicopter category).
Having fly by wire control technology, the flight computer mimics the AW139 handling characteristics when hovering but feels like a Beech King Air 250 when cruising, which is a smart marketing ploy.
CASA will probably classify the AW609 under the Powered Lift Category. This type of aircraft can take off and land vertically like a helicopter but can then move into forward flight like a traditional aeroplane. Dale South, section head standards, CASA, is working on the rules for aircrew training. They include around 80 per cent helicopter and 20 per cent aeroplane regulatory material.
When flying into land at an airport, it is envisaged ATC would treat the AW609 an aeroplane until it is approaching a helicopter landing site, when it then comes under helicopter rules. An interesting theory course for powered lift flight crew?
Cattle mustering – are drones now replacing quadbikes?
The poor safety record of the very popular quad bike has caused great concern to many transport safety authorities. As a result, new regulations are being issued to overcome a design fault whereby quad bikes tend to roll over when traversing rough terrain, or while being manoeuvred at high speed when mustering livestock. In Australia, new safety standards will apply to all quad bikes from 11 October 2020.
One Australian cattle farmer decided to minimise risks on his property by using drones rather than horses, motorbikes, quad bikes, or helicopters during the annual cattle muster. As a result, mustering at Calliope Station, in central Queensland, looked a little different this year. Instead of employing three men on quad bikes, Will Wilson did the job single-handed with a drone. Later, he told Meg Bolton from ABC Rural Radio “his cattle don’t mind being moved by drone”. “We have had injuries from using motorbikes before and obviously horses before that, but so far I’ve crashed a drone a few times and I still haven’t hurt myself,” he added.
Wilson is one of a growing number of farmers who know quad bikes are a leading cause of deaths and injuries on farms in Australia. Today, he is one of hundreds of Queensland farmers now using drone technology to make their operations safer and more efficient. “We are noticing in paddocks less than 3,000 acres they are pretty efficient, save a fair bit of labour, and it makes it safer for the men because they’re not put at risk,” Wilson said. “Drones are also being used to check crops and water levels.”
‘They’re fairly easy to maintain. All you need is a screwdriver and a soldering iron, and you can fix most mistakes’
Farmsafe Australia chairman Charlie Armstrong was reported as saying drones had the potential to make agriculture safer, which was the focus of Farm Safety Week held from 20- 25 July 2020. “Anything that can substitute for a dangerous vehicle or a dangerous machine such as a quad bike and do the job just as effectively is obviously valuable,” he said. “Rollovers occur mostly from unforeseen circumstances due to the lack of stability of the quad bike. One engineer described quad bikes as ‘being more stable upside down than the right side up’, so that gives you an indication of how easy they are to roll.”
Looking back over the recent years, Wilson said, “While reducing mustering to a one-man job was safer and more labour efficient, the drone also had a positive effect on the cattle.”
“Cattle build a better methodology about humans and work better with you,” he said.
“We try to not move our weaners with anything but the drones, and it changes their way of thinking as they are not running and scared as is the case with helicopters. They get to understand when this thing, ‘Louie the Fly’, is buzzing in their ear, they know they will probably get some fresher foods at the next holding yard and it certainly helps their mentality.”
Wilson has noted the cattle responded to the drone like they would a swarm of flies. “It doesn’t seem to be about the size or the noise, it’s just an annoying fly that they move together,” he said. “If you have a fly problem, cattle will mob up and this is just a big one of them and it happens to push them in the right direction.”
One important aspect of cattle mustering is aggressive mustering actions by helicopters can force the cattle to move in such a way they become stressed. When they finally reach an abattoir, the herd may be downgraded due to the discolouring of meat as a result of previous rough handling. Over the past decade or so this has led to a focus on low stress mustering techniques by helicopters and quad bike musterers. In past, cattle owners tried to have the muster completed as soon as possible to minimise the number (and expense) of helicopter hours required. Drone muster is less stressful, and cattle are less likely to break away from the herd.
Wilson has flown drones for the past three years, but this year was his first complete muster. He said it could become a permanent practice. “I’m thinking seriously about a position for someone to mustering with the drone. So, it’s a new type of job, I guess,” he said.
But he said there was a limit to what drones could achieve. “I’m damn sure the drone can’t put the cattle through the yard, so that’s something that’s not a robotic efficiency, it’s a human thing and we aren’t going to get better than that,” he said.
Wilson said it cost $1 per kilometre to fly a drone, factoring in battery life and the replacement of broken drones, the cost of drone mustering in a 600-hectare paddock is around $20. “They’re fairly easy to maintain. All you need is a screwdriver and a soldering iron, and you can fix most mistakes,” he said.
HAI announces the passing of James Wisecup
Helicopter Association International (HAI) sincerely regrets the passing of industry stalwart and past chairman of the board James Wisecup. Wisecup, a highly experienced 16,000-hour dual-rated pilot, retired from his post as Assistant Chief Pilot at Air Methods, in July 2019. He was awarded the FAA’s Wright Brothers Master Pilot Award in late June 2020 in recognition of his 50 years of professional, safe flight.
“Jim was a highly respected member of the rotorcraft community, and we will miss his knowledge and leadership,” says HAI president and CEO James Viola. “He was an advocate for safe flying, training, and mentorship, and he was always willing to share his experience and passion for flying.”
Growing up in the Houston area, Wisecup knew even as a teenager he wanted to fly for a living — his first ride in an airplane had taught him that — so he joined the US Army, which was then recruiting high-school graduates to fill helicopter pilot positions in Vietnam. During his year in Vietnam, Wisecup flew for a unit that conducted special operation missions. Characteristically, he turned his year of living dangerously into a funny story, remarking that he had had three engine failures caused by foreign object damage. The first was caused by a mortar round, the second by an artillery shell, and the third by a rocket-propelled grenade. He earned several decorations, including a Purple Heart, Silver Star, Bronze Star, and multiple air medals.
Wisecup was discharged in April 1971 and used his GI benefits to get his fixed-wing ratings, but his real goal was to get a job in the helicopter industry. He started as a line pilot in 1974, flying for Offshore Helicopters in Texas, and five years later was chief pilot for Bristow Helicopters US operations. His work for Bristow took him all around the world.
After a stint at Arctic Air, Wisecup next moved to the HAA sector in 1987, working first for Rocky Mountain Helicopters and, after 2002, for Air Methods Corp. In a 2018 interview with ROTOR magazine, Wisecup explained his long tenure in air ambulance this way: “It felt like the right place to make a difference — helping pilots to be better pilots, our managers to be better managers, and my check airmen to be better check airmen. Because if we can help each other, it’s a whole lot easier.”
“Jim was a true leader at Air Methods who positively impacted nearly every aviator that came through Air Methods in the last two decades,” says Raj Helweg, chief pilot at Air Methods. “He was a foundational part of how we train our pilots today. When I first came to Air Methods, he mentored me, as well as so many others, on how to become an aviation operations manager. We truly lost a great aviator, a wonderful educator, and a tremendous person and friend.”
Throughout his career, Wisecup made a point of sharing his knowledge and experience with the rotorcraft community. He was an active HAI volunteer, serving on the Air Medical, Flight Operations, and Heliport Committees. His contributions were noticed by the industry, which elected him to the HAI board, and he served as the 2018- 19 chairperson of the association. His last term on the board ended on 30 June 2020.
Wisecup was also active in the SUU College of Aerospace Sciences and Technology. There, he served as chairman of the Aviation Advisory Board, advanced flight instructor, and FAA designated pilot examiner, while mentoring hundreds of pilots. SUU representatives calculate that, since 2013, Wisecup had performed approximately 700 check rides with its students.
‘Jim was a true leader at Air Methods who positively impacted nearly every aviator that came through Air Methods in the last two decades’ Raj Helweg, Air Methods
“SUU was truly blessed to have Jim Wisecup as part of our family,” says Michael Mower, executive director and chief instructor, College of Aerospace Sciences and Technologies. “His influence and involvement over the last decade have left an indelible mark on a multitude of young and old pilots. The course of SUU’s aviation program is forever changed because of Jim’s guidance.”
Jim is survived by his wife, Jessica, and their five children, spouses, and six grandchildren.
Bell 206 helicopter operators look to composite blades
Currently CASA’s Register lists 284 fi ve place Bell 206 JetRangers and 85 of the larger seven place Bell 206L LongRangers. Across the Tasman, New Zealand, has 65 JetRangers and 25 LongRangers listed. The JetRanger entered civilian service in 1966 and more than 7,300 have been produced by a number of manufacturers. The success of the JetRanger created a demand for a larger helicopter and production of the LongRanger commenced in 1975 and 1,700 were produced.
Both models were regarded as being easy to fly, and after more powerful engines were introduced, they were considered suitable for hot and high conditions and had a service ceiling of around 13,500 feet.
In recent years, developments in composite technology has allowed third-party manufacturers to make rotor blades from composite materials which have proved to be superior to the traditional metal blade construction. Composite aerofoils can be moulded into a more efficient shape which produces more lift with less drag, improving performance in hot and high conditions. Secondly, the durability of composite blades and easy detection of fatigue problems results in a significant increase in service life of the new composite blades.
It is claimed the LongRanger main rotor blade life is 16,000 hours, up from 4,000 hours for the metal blade. The JetRanger can achieve 10,000 hours, a major improvement. The life of the tail rotor blades appears to be 5,000 hours, or about double that of a metal blade.
Industry sources suggest the increased efficiency of the tail rotor provides better directional control at higher altitudes, which makes landing in mountainous areas a little easier.
Heliwest in Western Australia is the Australian distributor for Van Horn Aviation (VHA), which manufactures the composite main and tail rotor blades for the Bell 206 family of helicopters. Feedback from customers confirms there is an increasing interest in the Bell 206L LongRanger blades.
The Bell 206 JetRanger blades have undergone a routine product improvement which results in a substantial cost saving and a smoother ride when compared to the previous version. VHA recently received Federal Aviation Administration (FAA) Type Inspection Authorisation (TIA) on its updated composite main rotor blades for the Bell 206B JetRanger helicopter. The FAA completed its fl ight tests of VHA’s 206B Version 2 main rotor blades on 21 July 2020, in Torrance, California.
“The main differences between our initial 206B main rotor blades and the Version 2 blades are the ply counts and orientation of the carbon fi bre skin and spar plies,” said VHA CEO James Van Horn. “We used experience gained from our 206L LongRanger main rotor blades to redesign the JetRanger blades. With the changes in plies and mass distribution, our 206B Version 2 main rotor blades will provide a ride nearly identical to our Bell 206L LongRanger blades.”
“The VHA 206B Version 2 main rotor blades feature corrosion resistant carbon fi bre skin and spars, an effi cient NASA-designed laminarfl ow aerofoil, tapered tip, and stainless steel/nickel abrasion strips along the entire length of the leading edge. Service life of the 206B Version 2 main rotor blade will be 10,000 hours with no overhauls required.”
VHA 206B Version 2 main rotor blades will be available directly from Heliwest as the Australian distributor. Since a limited number of the Version 2 blades will be available directly after the FAA STC/PMA authorisation is acquired, interested operators are encouraged to contact Damien Dew at Heliwest to secure a delivery position.
Royal Commission into National Natural Disaster Arrangements
The Royal Commission into National Natural Disaster Arrangements was established on 20 February 2020 in response to the extreme bushfire season of 2019-20, which resulted in loss of life, property and wildlife and environmental destruction. The purpose is to examine how Australia is prepared and co-ordinated to respond to bushfires and other natural disasters and how to mitigate the impacts. The commission is scheduled to release its report by 28 October 2020. By 31 July 2020, 1,772 submissions, 1,756 calls/queries to the information line and 171 responses to commission issues papers had been actioned.
The civilian helicopter sources from both Australian and international sources were responders to the disasters that were unfolding on the ground. Readers are encouraged to follow the commission’s website where an enormous amount of information is now available for perusal by the aviation industry. There are many lessons to be learnt, especially how so many different cultures, technologies and government agencies worked together during the worst Australian fire disaster on record.
Of particular interest to the commissioners was a 42-page submission by John McDermott, managing director and chief pilot of McDermott Aviation. In part, McDermott stated, “The concept of the Wolfpack Strike Force should read carefully by newcomers to this industry, as it is reflecting on lessons learnt by the international firefighting community.” In reply to a question on this topic from the royal commission, McDermott’s answer was, “Small fires – large fires? As silly as this sounds, all fires start small so the key should be how to keep them small and prevent them developing into large fires. The answer is early and effective intervention.”
McDermott’s advice is no doubt based on his experience over several decades fighting wildfires around the world. The Wolfpack Strike Force concept has been rather slow in being accepted by Australians; however, to be fair our fires are normally spread over large areas with very small populations. Therefore, observations of an outbreak may not be easily identified, the command control systems during past years were still undergoing development and firefighting resources, both air and ground, were few and far between.
But today, satellite technology, airborne infrared sensing devices fitted to aeroplanes, helicopters and drones can feed real time data into computer systems at many headquarters enabling a very sophisticated data analysis and the timely tasking of resources. The commission, no doubt will look at the good and the bad reports flowing from the recent bushfire disasters and will make appropriate recommendations, hopefully, prior to the next fire season.
To its credit, the commission, due to the coronavirus pandemic, has to overcome challenges in meeting its planned timelines. The majority of the work will have to be completed prior to the oncoming fire season in Australia to ensure we can apply the lessons of the past. In early August, international media was reporting on large wildfires occurring near Los Angeles. This makes our emergency service workers rather nervous!
McDermott Aviation is the largest privately owned helicopter operator in Australia (wholly owned, based and operated from Australia) – employing more than 160 staff. Current helicopter fleet totals 32 consisting of 4 Bell 206 LongRangers; an AB 205 (The AB 205 helicopter is the version of the famous UH-1 “Huey”, widely used in the Vietnam war); 15 X Bell 214B; 1 X Bell 204; 3 X Bell 47 Soloy; 8 X AS365 Dauphine and 6 X AS355 Twin Squirrels.
McDermott’s report is at: https://naturaldisaster. royalcommission.gov.au/ system/files/submission/ NND.001.01003.pdf
Necessity is the mother of invention!
“Necessity is the mother of invention” is an old English language proverb that first appeared around 1658.
Today, the current Australian bushfires that started in September 2019 showed Australia was well prepared for the summer bushfire season. Unfortunately, not only were the fires several months early, but their intensity was far more than expected and often rated later as catastrophic events.
As a result, despite the best efforts of exceptionally well-managed ground firefighting teams supported by an enormous aerial firefighting fleet of around 150 aircraft. Sadly, 20 deaths were recorded, and several hundred were hospitalised. Property and livestock losses are almost beyond belief. Several thousand homes have been destroyed and livestock losses are probably approaching half a million. These figures will move upwards as emergency services, supported by the Australian Defence Force, carry out damage assessment surveys and issue their reports.
The recent introduction of an enormous Australian Defence Force capability was desperately needed as emergency services within each state and were becoming exhausted and needed rest and relief. The latter meant bringing in new Australian and international firefighting resources.
The unusually long fire season had arrived early during a severe drought. Often fires become catastrophic when subject to dangerous weather conditions. As a result, relief crews must undergo training prior to being allocated to fire units operating both on the ground and in the air.
But how do we provide timely Australia-wide operational and safety standardisation training to new and relief crews, especially those involved with aerial firefighting? Aviation firefighting assets are extremely expensive, costly to operate and required to operate in what is considered a very high-risk environment. Since September three helicopters crashed in non-fatal accidents.
‘Australia has a very capable innovative simulation industry, which can support many high-risk industries’
According to global experts, Australia has a very capable innovative simulation industry, which can support many high-risk industries that cannot undertake training in the workplace due to costs, nor simulated emergencies, which may damage equipment or injuries to workers.
But there is a new aerial firefighting technology about to enter service before the end of 2020, proving “necessity really is the mother of invention!” Charles du Plessis, managing director, GeoSim Technologies, told Rotor Torque that the company is working with key stakeholders to develop an air attack simulation facility, to be known as the Vulcan Simulation Centre.
Within this centre will be simulator training devices based on some of the Australian firefighting fleet. Initially the following will be installed: Air Tractor 802 fire-bombing simulator complete with a Generation II Fire Retardant Dispersal (FDRS) system; an AS350 B3 Helicopter Simulator; a VR Cessna 337(Bird dog) simulator and two other virtual reality helicopter simulation units. Of interest will be a command and control training centre for training managers and other key non-aviation technical staff, as well as replica Technisonic communication units that operate via the intranet instead of the usual radio bandwidth.
In addition, GeoSim has spent the last two years developing a unique and dynamic fire program add-on that reacts to bush fuel loads, moisture, wind speed, temperature, humidity and the slope of the topography, ensuring fire simulation experience is very close to actual conditions and that corresponding atmospheric conditions are similar to those found in an actual bush fire. Du Plessis also stated the Vulcan Simulation Centre will be opened before the end of the year.
Want to see more stories from trusted news sources?
Make Australian Aviation a preferred news source on Google.
Click here to add Australian Aviation as a preferred news source.