Close sidebar

ATSB releases final report into S-76 engine failure

written by australianaviation.com.au | October 24, 2016
Esso Australia’s Sikorsky S-76C, VH-EXU. (ATSB)
Esso Australia’s Sikorsky S-76C, VH-EXU. (ATSB)

The Australian Transport Safety Bureau (ATSB) has released its final report into the engine failure of an Esso Australia Sikorsky S-76C on the morning of July 11 2013 while the helicopter was departing from an offshore platform.

The failure of the right-hand engine in VH-EXU occurred as the helicopter was climbing out on departure from the Snapper platform in Bass Strait, 74km east of Longford, south-east of Sale in Victoria’s Gippsland region.

After setting the nose-down attitude for the departure, the crew reported a loud bang accompanied by significant airframe vibration.

Advertisement
Advertisement

The helicopter descended rapidly, however the pilot and co-pilot recovered the descent to within 30ft of the sea surface and established a positive rate of climb.

The crew also discharged fire extinguisher agent into the right engine during the recovery in response to an engine fire warning.

The S-76C, with two crew and 10 passengers on board, made a single-engine landing back to Longford under escort by other company helicopters.

The ATSB report said the engine failure was attributed to the fracture of a second-stage, high-pressure turbine blade.

PROMOTED CONTENT

The liberated blade impacted and damaged adjacent blades with the resulting loss of power and associated increased vibration.

The engine and failed blade structure were inspected by the engine manufacturer which concluded that the failure was due to a combination of metal fatigue, blade creep and oxidation deposits.

While a definitive cause for the blade fracture has yet to be determined, blade material, dimensional and quality assurance checks have ruled out any deficiencies.

“In the absence of a conclusive cause of the blade fracture and remedial information, the operator imposed a service life limitation on their helicopters’ engine turbine assemblies that were fitted with the same blades,” said the ATSB report.

“In addition, the engine manufacturer issued notifications to operators and introduced specific inspection requirements relevant to potentially affected turbine assemblies.”

Elevated helideck profile showing a representation of the operator’s Category B departure with all engines operating (in black) and an estimation of the departure profile for the occurrence flight (in red). (ATSB)
Elevated helideck profile showing a representation of the operator’s Category B departure with all engines operating (in black) and an estimation of the departure profile for the occurrence flight (in red). (ATSB)

The ATSB also said this event highlighted how a situation can quickly change from normal operations to one where the flight crew have to deal with an in-flight emergency.

Their report said effective crew interaction, thorough pre-briefing and anticipation of what can go wrong has been shown to increase the likelihood of a successful outcome and the recovery from the engine failure and the safe return to Longford reaffirmed the benefits of those preparatory actions.

At the time of writing, the engine manufacturer was continuing its investigation into the cause of the blade fracture.

The full report can be read on the ATSB website.

Steer your own in-flight experience – available on print and digital Whether our classic glossy magazine in your letterbox, daily news updates in your inbox, peeling back a few layers in the podcast or our monthly current affair reports, you can count on us to keep you up to date. Sign up today for just $99.95 for more exclusive offers here. Subscribe now at australianaviation.com.au.

ATSB releases final report into S-76 engine failure Comment

  • Martin

    says:

    This is a good outcome and shows the advantage of twin engine helos, even during the take-off phase.

    I might be nit-picky but the photo that goes with this item is of VH-EXK going by the letter on the nose of the helo!

Leave a Comment to Martin Cancel

Your email address will not be published. Required fields are marked *

ATSB releases final report into S-76 engine failure

written by australianaviation.com.au | October 24, 2016
Esso Australia’s Sikorsky S-76C, VH-EXU. (ATSB)
Esso Australia’s Sikorsky S-76C, VH-EXU. (ATSB)

The Australian Transport Safety Bureau (ATSB) has released its final report into the engine failure of an Esso Australia Sikorsky S-76C on the morning of July 11 2013 while the helicopter was departing from an offshore platform.

The failure of the right-hand engine in VH-EXU occurred as the helicopter was climbing out on departure from the Snapper platform in Bass Strait, 74km east of Longford, south-east of Sale in Victoria’s Gippsland region.

After setting the nose-down attitude for the departure, the crew reported a loud bang accompanied by significant airframe vibration.

Advertisement
Advertisement

The helicopter descended rapidly, however the pilot and co-pilot recovered the descent to within 30ft of the sea surface and established a positive rate of climb.

The crew also discharged fire extinguisher agent into the right engine during the recovery in response to an engine fire warning.

The S-76C, with two crew and 10 passengers on board, made a single-engine landing back to Longford under escort by other company helicopters.

The ATSB report said the engine failure was attributed to the fracture of a second-stage, high-pressure turbine blade.

PROMOTED CONTENT

The liberated blade impacted and damaged adjacent blades with the resulting loss of power and associated increased vibration.

The engine and failed blade structure were inspected by the engine manufacturer which concluded that the failure was due to a combination of metal fatigue, blade creep and oxidation deposits.

While a definitive cause for the blade fracture has yet to be determined, blade material, dimensional and quality assurance checks have ruled out any deficiencies.

“In the absence of a conclusive cause of the blade fracture and remedial information, the operator imposed a service life limitation on their helicopters’ engine turbine assemblies that were fitted with the same blades,” said the ATSB report.

“In addition, the engine manufacturer issued notifications to operators and introduced specific inspection requirements relevant to potentially affected turbine assemblies.”

Elevated helideck profile showing a representation of the operator’s Category B departure with all engines operating (in black) and an estimation of the departure profile for the occurrence flight (in red). (ATSB)
Elevated helideck profile showing a representation of the operator’s Category B departure with all engines operating (in black) and an estimation of the departure profile for the occurrence flight (in red). (ATSB)

The ATSB also said this event highlighted how a situation can quickly change from normal operations to one where the flight crew have to deal with an in-flight emergency.

Their report said effective crew interaction, thorough pre-briefing and anticipation of what can go wrong has been shown to increase the likelihood of a successful outcome and the recovery from the engine failure and the safe return to Longford reaffirmed the benefits of those preparatory actions.

At the time of writing, the engine manufacturer was continuing its investigation into the cause of the blade fracture.

The full report can be read on the ATSB website.

Steer your own in-flight experience – available on print and digital Whether our classic glossy magazine in your letterbox, daily news updates in your inbox, peeling back a few layers in the podcast or our monthly current affair reports, you can count on us to keep you up to date. Sign up today for just $99.95 for more exclusive offers here. Subscribe now at australianaviation.com.au.

ATSB releases final report into S-76 engine failure Comment

  • Martin

    says:

    This is a good outcome and shows the advantage of twin engine helos, even during the take-off phase.

    I might be nit-picky but the photo that goes with this item is of VH-EXK going by the letter on the nose of the helo!

Leave a Comment to Martin Cancel

Your email address will not be published. Required fields are marked *

Each day, our subscribers are more informed with the right information.

SIGN UP to the Australian Aviation magazine for high-quality news and features for just $99.95 per year